Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lethbridge, Albert, Canada basic wind speed

Status
Not open for further replies.

StructLin

Structural
Jun 4, 2008
29
Need help please, can anybody help me to find the basic wind speed in Lethbridge, Albert, Canada? I need work on a project over there. ASCE7-05 only gives US basic wind speed map.

Thank you very much.
 
Replies continue below

Recommended for you

I MAY have that information for you though I can only dig it up when I am back at home.
 
StructLin,

for LETHBRIDGE, ALBERTA(Canada) the wind pressure is as follows:

For 1/50 value =0.82 kpa( equivalent to 35.6m/s wind speed)

For 1/10 value =0.64 kpa( equivalent to 31.5m/s wind speed)

Snow load(1/50)= 1.2 kpa
Associated Rain= 0.1 kpa

Hope this will help.

Lokstr
 
Don;t forget the gust factors as well- we did a project in Lethbridge and holy man, were the wind loads ever high!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor