Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Leak Currents in a Generation Building

Thread starter ReliabilityPF
Start date Feb 21, 2005

Status: Not open for further replies.

Feb 21, 2005

ReliabilityPF

Electrical

The AC leak current values on our generation instalation in ground connections ranged between 0.07 and 6 Amps. The resuts of these measurements indicate an alert.

The impedance of the global grounding system is 0.34Ohm.

Witch are the safe current range in a generation building?