I'm searching for candidate polymers that possess very low refractive index (~1.3 - 1.35) in the visible portion of the spectrum. Polymers that could be injection molded are preferred, but even relatively thin, solvent coatings may be acceptable. Adhesion to other engineering optical plastics such as polycarb, acrylic/PMMA, polystyrene is also a consideration. Transparency is pretty critical as well.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Law Refractive Index Fluropolymer
- Thread starter honda1997
- Start date