Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lade's single hardening model

Status
Not open for further replies.
Isam.

Isam.

Geotechnical
Joined
Jan 31, 2023
Messages
4
Location
US
Can you please guide me on how to use the Lade's single hardening material model in Abaqus (what is the name of the model in Abaqus)? I could not find it explicitly.
 
Sort by date Sort by votes
It's not implemented in Abaqus so you would need a subroutine. Check the article "Application of the Single Hardening Model in the Finite Element Program ABAQUS" by K.P. Jakobsen.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
Excessive Distortion in Press Hardening Simulation
Replies
1
Views
5K
FEA way
FEA way
Wonder_Women
  • Locked
  • Question Question
Modeling Kinematic hardening model for steel in Cyclic analysis
Replies
3
Views
625
FEA way
FEA way
zenzizenzizenzic
  • Locked
  • Question Question
Ultimate strength of single shear bolted connections with curling
Replies
0
Views
991
zenzizenzizenzic
zenzizenzizenzic
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
Saks1235
  • Locked
  • Question Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top