Kynar lined bent pipe

[chicagoeng]

Does anyone know of a vendor that can supply an 8" diameter Kynar-lined bent pipe section with two approximately 20 degree bends in it? The overall length is about 5 feet. I've only been able to locate suppliers of this type of pipe who can produce a maximum 4" diameter bent pipe.

 

[StoneCold]

I would try Resistoflex, Edlon (who was resently bought by someone else), and Saint Gobain. They all do lined pipe. I don't know the sizes. You may have to resort to an alloy pipe.

Regards
Stonecold

 

[jdarco]

In addition to the names Stonecold mentions, try Fusibond. From your handle, it appears you are in Chicago? They are in Downers Grove, IL. Is there a reason you can't use a miter cut piece of pipe and have to have bent?

 

[moltenmetal]

Get a spool piece made in accordance with a liner's specs and have it centrifugally lined with ETFE. Resistoflex will do this for you.

 

[joeswoes]

Ethylene also can rotomold ETFE as well as fabricate the pipe

http://www.ethylene.com