KSM PUMP VIBRATION

[ccc123]

Hi guys,

does any one of you have datasheet or any information about the vibration limit for KSB horizontal pumps - multitec type C.

Thanks for your help

 

[Artisi]

my suggestion is to contact KSB or their agent, who better to give this advice.

Naresuan University
Phitsanulok
Thailand

 

[BigInch]

Hydraulic Institute recommends the following vibration limits for horizontal pumps,

Take some log-log paper,

Label "Displacement (Mils) on the Y-axis"
Label "Vibration Frequency (Cycles per MINUTE)" on the X-axis

Draw line 1 from point (150 CPM, 6 mils) to
point (375 CPM, 6 mils)
Draw line 2 from previous point to (2000 CPM, 3 mils)
Draw line 3 from previous point to (20000 CPM, 0.3 mils)

Lower left enclosed area is acceptable for pumps.



Call before you dig.