Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Konica 7020

Status
Not open for further replies.
sfb42

sfb42

Electrical
Joined
Mar 30, 2007
Messages
3
Location
GR
Hi there
I just installed a Konica 7020 copier/printer to my PC. I can print from any other application except Autocad. I have the 2006 version of Autocad installed.

Any suggestions??
 
Sort by date Sort by votes
Go through the Plotter Manager in AutoCAD and add that printer. Most likely start with "Network Plotter Server" type of setup and use something like HP 5000 driver or such. If that does not work, try another driver till you find a good one.


"The fear of the Lord is the beginning of wisdom"
 
Upvote 0 Downvote
Already did that. I also tried with some more HP Printers, but nothing happened.

The strange thing is that the printer doesn't receive any commands. Nothing happens.

Any suggestions??
 
Upvote 0 Downvote
Directly connected to my computer via a parallel cable on LPT1
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top