Just so True! 1

[dik]

Catch the link...

http://www.xtranormal.com/watch/12060359/conversation-with-an-ironworker

 

[dhengr]

So... what’s new? He cut a little more off and it was still too short. He’ll need a few more bolts.

 

[Brad805]

We have shared that with many. It is so appropriate for so many things we deal with everyday.

Brad

 

[jgailla]

The bad thing is that the ironworkers could probably make a similar video about engineers (from a former ironworker).

 

[Lemony]

I think a response video would be hilarious. Without being too insulting, what are the chances of an ironworker being bloody minded enough to make such a video?

 

[dik]

Nothing to do with that particular trade... I've encountered that type of problem occasionally with many trades... Iron workers, from my experience, are some of the finest trades... typically working to a 1/16"...

Dik

 

[Lutfi]

A good iron worker will make anything work as long as he has a drift pin and a cutting torch!

Seriously, they are great and they have my respect. As any other trade, there are the good and the bad.


Regards,
Lutfi

 

[PersonalProfile]

It is a good find, though has been noted on the forums previously:

http://www.eng-tips.com/viewthread.cfm?qid=308244

Regards,
Lyle