Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
junction box inspection for corrosion
- Thread starter helpyou
- Start date
Yes, as it's simple and easy to do.
And, I thought it's the reason for using the stainless steel junction box to protect the wiring of the instrument and controls. In the corrosive environment or special instrument, the air purge may also be necessary.
And, I thought it's the reason for using the stainless steel junction box to protect the wiring of the instrument and controls. In the corrosive environment or special instrument, the air purge may also be necessary.
DAVIDSTECKER
Mechanical
Cortec and others make Vapor corrosion inhibitors that come in packet, tape and spray forms if you need extra protection.
- Status
Similar threads
- Locked
- Question
- Locked
- Question