JT for Piece parts of an assemly in TCE

[ashivu123]

How to create JT for piece part of an assembly. I have an assembly that contains approximately 1000 part and creating JT for indi-dual part by toggling on option "Save JT data" in NX consumes long time. looking for quickest way to create JT files for parts. I am working in NX-8.5 integrated with TCE

 

[NutAce]

Open your assembly in NX. In File-Options-Save options set the "Save JT Data" option.
Then go to File-Save-Force Save all....

This option will save ALL opened parts, regardless if they are modified or not...


Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[ashivu123]

Thanks Nutace above option is working for parts which are not released and non read only parts. But most of the parts in the assembly are released and read only, JT is not creating for this files.

 

[NutAce]

Of course it is neccesary to have access to those files...
If you don't have access this will be a DBA task.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[ashivu123]

DBA need to unrelease parts to create JT??

 

[NutAce]

No..DBA has te rights to add data to already released items.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[ashivu123]

ok thanks