Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

J-integral

Status
Not open for further replies.
eXileTM

eXileTM

Mechanical
Joined
Sep 27, 2012
Messages
6
Location
HU
Hello!

Is it possible to get the components of the J-integral (refer to mode I II and III)? It only gives equivalent.

Thanks,
Peter
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
Tegguy
  • Locked
  • Question Question
ANSYS: Beam Elements vs Joint Stiffness?
Replies
11
Views
2K
Tegguy
Tegguy
LS_SMS
  • Locked
  • Question Question
Joint Reactions in Solution Combination
Replies
4
Views
1K
STpipe
STpipe
manurico
  • Locked
  • Question Question
Help creating joint between 2 remote points
Replies
1
Views
1K
PedroCarneiro22
PedroCarneiro22
RMANERA
  • Locked
  • Question Question
J2 flow theory of plasticity in Ansys Apdl?
Replies
0
Views
172
RMANERA
RMANERA

Part and Inventory Search

Sponsor

Back
Top