Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Isomag Bearing Isolator Question

Status
Not open for further replies.
HoustonMechEngr

HoustonMechEngr

Mechanical
Joined
Jun 9, 2010
Messages
22
Location
US
I've been told that the Isomag Magnum-S is suitable for completely flooded bearing housings, while the Magnum-C is not a good choice for this environment. Is this due to the "S" model actually being hydraulically loaded from the OD?
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
Question- setting spring loaded thrust bearings
Replies
2
Views
2K
TugboatEng
TugboatEng
ME1289
  • Question Question
LPG Deepwell Pump Steady Bearing Failure
Replies
15
Views
5K
LittleInch
LittleInch
moiz19670309
  • Locked
  • Question Question
SKF Bearing identification
Replies
7
Views
670
Nutzman
Nutzman
Turbo1123
  • Locked
  • Question Question
PD Pump Big End Bearing Failure
Replies
4
Views
575
3DDave
3DDave
ME1289
  • Locked
  • Question Question
Sundyne LMV-801 intermediate bearing box failures
Replies
2
Views
685
Artisi
A

Part and Inventory Search

Sponsor

Back
Top