Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

isolation valve pressure rating

Status
Not open for further replies.
Tmoose

Tmoose

Mechanical
Joined
Apr 12, 2003
Messages
5,636
Location
US
pulverized coal piping normally has 50 psi rating requirement.
Isolation valves are required in the coal piping (duct). Is the valve expected function normally after a 50 psi event, or is it sufficient for it just to remain intact?

thanks

Dan T
 
Status
Not open for further replies.

Similar threads

P
  • Question Question
NFPA 20 - Check valve on fuel return line
Replies
1
Views
3K
LittleInch
LittleInch
Ribicki
  • Locked
  • Question Question
Automatic release valve position
Replies
3
Views
595
Ribicki
Ribicki
jjmoore73
  • Locked
  • Question Question
Fire Pump Maximum Static Suction Pressure
Replies
5
Views
1K
jjmoore73
jjmoore73
morgan.z
  • Locked
  • Question Question
Pressure reducing valve in sprinkler
Replies
2
Views
2K
morgan.z
morgan.z
IceYogurt
  • Locked
  • Question Question
NFPA 20: Type of valve at test connection on sensing lines
Replies
3
Views
1K
UFT12
UFT12

Part and Inventory Search

Sponsor

Back
Top