Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Isogen spool weight population

Status
Not open for further replies.
OldmanHaggler

OldmanHaggler

Mechanical
Joined
Sep 9, 2003
Messages
47
Location
CA
Hello all,

I am using Autocad 2010 with Cadworx 2011 & I use Isogen for my spooling drawings, I'm using the "Cut List Backing" template from Isogen.

I would like to know or learn how to have the weights populate out
onto each spool drawing that I create with Isogen.

Any help would be great!

Thx.

Lee
 
Status
Not open for further replies.

Similar threads

Cronos_2P
  • Locked
  • Question Question
Error Isogen of Cadworx
Replies
4
Views
3K
Cronos_2P
Cronos_2P
C
Piping Spool Drawings service
Replies
0
Views
5K
cadmasters.guru
C
SeasonLee
  • Locked
  • Question Question
Line weight on FCF
Replies
5
Views
215
chicopee
chicopee
4mranch1
  • Locked
  • Question Question
How To Change Line Weight?
Replies
2
Views
187
4mranch1
4mranch1
dik
  • Locked
  • Question Question
Layers and Line Weights
Replies
5
Views
241
dik
dik

Part and Inventory Search

Sponsor

Back
Top