Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO/DIN naming of a screw

Status
Not open for further replies.
zabart112

zabart112

Automotive
Joined
Oct 13, 2005
Messages
2
Location
DE
Thank you for giving me indication to be understood by german/american engineer when I need to register a new screw as standard part:
example:
CBLX40-M8x1.25-lg60, chamfer point. For french engineer this means standard head cylindrical spheric top large base 6 lobes print size40.
I am asked to accept each single radius cold forgeing needs!
 
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
interpretation of unilateral tolerance defined with ISO standard
Replies
0
Views
2K
imanoj23
I
spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
768
O.Rezzik
O.Rezzik
Ganeshrnair9
  • Locked
  • Question Question
ISO standard for welding procedure and welder qualification on Alu Zinc coated steel sheet
Replies
1
Views
1K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top