Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Isentropic efficiency

Status
Not open for further replies.

danieldecko

Mechanical
Joined
Oct 12, 2004
Messages
5
Location
TR
In gas turbine catalogues, performance characteristics of gas turbine at ISO conditions are given; such as: heat rate, exhaust temperature, exhaust pressure, pressure ratio, work output. Is there a way to calculate isentropic efficiencies of air compresor and gas turbine from these data? Or, Is there any source that states the isentropic efficincies of air compressor and gas turbine of commercially available gas turbine systems.
Thanks
DD
 
Yes, the standard methods are in most Mechanical Engineer handbooks. For compressers, one useually uss the polytropic efficiency, and not the isentropic efficiency.

Another difficulty is determining what is the true value of the TiT ( turbine inlet temperature), considering the the vendors have different ways of defining this critical value. The straightforward method based on a heat and mass balance around the combustor is not correct for modern turbines that use various cooling methods for the first row of blades.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top