I am doing a project where I am to use an IRIS flow control valve to vary a volumetric flow from 100 scfm to 2000 scfm and it needs to handel dilute diesel exhaust from 40 to 400 degrees F. I need to design this, does anyone have any info or advice for this, sorry but i am on a very tight deadline. Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
IRIS Control Valve help
- Thread starter kickerz24
- Start date
Similar threads
