IR and PI measurement procedure

[petronila]

Dear All

We are working on the development of one good procedure to perform IR, PI and DAR test in 5 MVA MV Generators.

Any ideas? all inputs are wellcommen.

Thanks and regards

Carlos

 

[Zogzog]

Why not use existing procedures from recognized standards? Try ANSI/NETA MTS.

http://www.netaworld.org

 

[starkopete]

Here's the link for the IEEE Standard.

http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=836297

Thanks

 

[justatech]

IEEE 43 and tech manual for equipment.
If any of the generators are new, high voltage testing may void your warranty.

 

[electricpete]

Maybe you will pick up a few items here (although they refer to limits from older version of IEEE43):

http://www.usbr.gov/power/data/fist/fist3_1/vol3-1.pdf

=====================================
(2B)+(2B)' ?