Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Iodine & phosphogypsum emissions

Status
Not open for further replies.
crizalde

crizalde

Chemical
Joined
Jun 25, 2015
Messages
1
Location
SA
thread1533-342744

Good Day!

Sir Birkato,

I'm working as consultant at RC Jubail, KSA. We have a development of industry project (Metallurgical and Phosphate).
traces of Iodine emissions and phosphogypsum were identified using AERMOD & CALPUFF model. what are the significant impact of these
emissions and what are the possible mitigating measures are applicable in order to meet the applicable standards.

Regards

Crizalde
 
Status
Not open for further replies.

Similar threads

dwf123
  • Locked
  • Question Question
Splicing vs Lapping Reinforcement Mesh in Ground Bearing Slabs & Floors
Replies
1
Views
482
darthsoilsguy2
darthsoilsguy2
cab454
  • Locked
  • Question Question
Reinforcement in Concrete Curb & Gutter
Replies
9
Views
2K
cab454
cab454
Structuralquestion
  • Locked
  • Question Question
Slope stability & pile foundations
Replies
1
Views
344
EireChch
EireChch
clp2
  • Locked
  • Question Question
Small Engineering Firm Rules & Structure?
Replies
5
Views
477
zzzcivil
zzzcivil
PipeStretcher
  • Locked
  • Question Question
Oil & Gas Plant/Facility Phased project construction, deliverable drawing numbering & rev ha
Replies
2
Views
249
bimr
bimr

Part and Inventory Search

Sponsor

Back
Top