newjerseype
Civil/Environmental
I know interstates have to be designed to AASHTO standards but what about ramps at interchanges? Is there a grey area along the ramp where the standard changes from AASHTO to the state design manual?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
interstate design standard 1
- Thread starter newjerseype
- Start date
- Status
-
1
- #2
newjerseype,
All highways, including Interstates, are done to the local State DOT standards and/or Turnpike/Toll Highway Authority. Many of these standards incorporate AASHTO by reference, but note exceptions to AASHTO in their own design publications.
Occaisionally, you will be working with two state jurisdictions, but there is usually a clearly delineated scope as to which standard applies.
Contact the agencies for copies of their design guidance. Many are available online for download. Some jurisdictions have more complete and comprehensive guidance published than others.
Jeff
All highways, including Interstates, are done to the local State DOT standards and/or Turnpike/Toll Highway Authority. Many of these standards incorporate AASHTO by reference, but note exceptions to AASHTO in their own design publications.
Occaisionally, you will be working with two state jurisdictions, but there is usually a clearly delineated scope as to which standard applies.
Contact the agencies for copies of their design guidance. Many are available online for download. Some jurisdictions have more complete and comprehensive guidance published than others.
Jeff
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question