Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Integral bypass valve

Status
Not open for further replies.
engmat2007

engmat2007

Mechanical
Joined
Sep 19, 2007
Messages
3
Location
CA
Hello,

We specified in one of our specifications that gate valves (2" to 24") in steam service shall have an external 3 valve bonnet relief/equalization system. We got a suggesting to use an external 2 bonnet relief/equalization system instead of 3. Which configuration is best?, which configuration is more commonly used in the oil & gas industry?, what do you think?.

Thanks!

engmat2007
 
Status
Not open for further replies.

Similar threads

AplusA
  • Locked
  • Question Question
Integral trunnion vs separate trunnion
Replies
3
Views
2K
GBTorpenhow
GBTorpenhow
A
  • Question Question
Use of Gate Valve for Throttling
Replies
12
Views
11K
TugboatEng
TugboatEng
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
35jacob35
  • Locked
  • Question Question
Valve Paint Aplication
Replies
3
Views
3K
SJones
SJones
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567

Part and Inventory Search

Sponsor

Back
Top