Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

insert molding with santoprene

Status
Not open for further replies.
aileenm

aileenm

Industrial
Joined
Sep 26, 2003
Messages
3
Location
CA
Hi
I am interested in using Santoprene for insert molding, for the manufacture of trailer wiring kits/automotive wiring harnesses. Does anyone know what guidelines I should be following in order to have the product UL/CSA approved?

Also can I used this Santoprene on conventional thermoplastic insert molding machines?

Thanks
 
Status
Not open for further replies.

Similar threads

Mark M
  • Locked
  • Question Question
Minimum cavity pressure for rubber molding
Replies
0
Views
681
Mark M
Mark M
L
  • Locked
  • Question Question
Issues with EPDM spinning
Replies
3
Views
6K
btrueblood
btrueblood
Marouane
  • Locked
  • Question Question
Finding Silicone Rubber compatible with Epoxy and Polyurethane Resins
Replies
1
Views
1K
Compositepro
Compositepro
Gautham_26
  • Locked
  • Question Question
frequent nozzle block in injection molding
Replies
2
Views
301
btrueblood
btrueblood
Oksitocin
  • Locked
  • Helpful tip Helpful tip
Compounding for injection molding
Replies
3
Views
279
Oksitocin
Oksitocin

Part and Inventory Search

Sponsor

Back
Top