Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Insert Crack in model

Status
Not open for further replies.
Bobbycartuner

Bobbycartuner

Materials
Joined
Apr 19, 2010
Messages
7
Location
DE
Hi
I'm doing a electric current analyse on a spezimen.
Therefore i'd like to insert a crack with a variable size into it. I'm working with Abaqus 6.9. Is there any option to insert cracks without using the extrude tool??

Greetz Karl
 
Status
Not open for further replies.

Similar threads

Vishakh_Rajendran
  • Question Question
Crack Initiation Criterion for orthotropic materials
Replies
2
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
Smadar11
  • Locked
  • Question Question
ABAQUS- stractural model- fine elements in crack area
Replies
3
Views
407
FEA way
FEA way
R
  • Question Question
Zig-Zag Strain Pattern in NSM FRP Pull-Out Simulation (Cohesive Zone Model) – Need Help
Replies
2
Views
9K
Roshaan
R
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
M
  • Locked
  • Question Question
Material model for plain weave in ABAQUS
Replies
4
Views
2K
Materials Freak
M

Part and Inventory Search

Sponsor

Back
Top