Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Infiltration Trnech Design

Status
Not open for further replies.

ZAMDL

Civil/Environmental
Joined
Nov 27, 2007
Messages
1
Location
US
Can anyone advise how to calculate the dimensions of an infiltation trench for water supply based on the information below?

It is proposed to construct an infiltration trench with gravel pack ,
Required yield 5 l/s
River bed materials Very coarse sand
Depth to water table below river bed at end of dry season 1.5 m
Height of river bank above river bed 4.0 m
Infiltration pipe 150 mm slotted plastic pipe.
Depth of pipe below dry season water level 1.0 m
Hydraulic conductivity of gravel for bedding (k) 20 m/d
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top