Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inertial relief problem in abaqus?

Status
Not open for further replies.
mmatrix

mmatrix

Automotive
Joined
Jul 16, 2008
Messages
2
Location
CN
Hi,all
When relief degree is 1-3(translation), the analysis is OK, but when relief degree is 4-6 in local system(using oreintation & reference point in key words),there is always some errors.
Is there some tips for defining inertial relief in local rotation in abaqus. Thanks a lot.
 
Status
Not open for further replies.

Similar threads

swahlgren
  • Locked
  • Question Question
Abaqus 2025 installation files
Replies
2
Views
2K
FEA way
FEA way
A
  • Question Question
Problem fusing cone with curved geometry in Salomé-Méca (GEOM module)
Replies
0
Views
6K
Aliénor
A
GregLocock
  • Locked
  • Question Question
Z88 Aurora - model problem
Replies
3
Views
4K
GregLocock
GregLocock
N
  • Locked
  • Question Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
4K
dmapguru
dmapguru
Kamyar_K
  • Locked
  • Question Question
Slip in the rigid railroad track - ABAQUS model
Replies
3
Views
867
Kamyar_K
Kamyar_K

Part and Inventory Search

Sponsor

Back
Top