Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Indium Brazing

Status
Not open for further replies.
UchidaDS

UchidaDS

Mechanical
Joined
Sep 28, 2011
Messages
116
Location
US
I have a molybdenum rod (about 1/4" diameter) and a Molybdenum mesh substrate. I would like to braze this two items together and required Indium brazing (drawing callout).
Any recommendation?
Service temperature is more than 100 Celcius.
 
Status
Not open for further replies.

Similar threads

rollingcloud
  • Locked
  • Question Question
What's the main cause for incomplete silver brazing on stainless steels?
Replies
11
Views
4K
TugboatEng
TugboatEng
Tmoose
  • Locked
  • Question Question
good products for cleaning steel prior to oven silver brazing
Replies
1
Views
279
EdStainless
EdStainless
Ingenuity
  • Locked
  • Question Question
Oxy-Acetylene brazing of 270 ksi 7-wire steel strand in butt joint
Replies
13
Views
642
EdStainless
EdStainless
trainguy
  • Locked
  • Question Question
Brazing a structural component - thinkable?
Replies
8
Views
640
EdStainless
EdStainless
NickE
  • Locked
  • Question Question
Induction Brazing
Replies
3
Views
403
NickE
NickE

Part and Inventory Search

Sponsor

Back
Top