Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

In specifications for fabrication o

Status
Not open for further replies.
krishna1975

krishna1975

Structural
Dec 5, 2007
3
In specifications for fabrication of steel structures,I find one clause -" Bolted bracing length to be reduced by 1/1000 for draw", I did not understand this meaning.Kindly elaborate anybody ?
 
Status
Not open for further replies.

Similar threads

wontweldcantweld
  • Locked
  • Question
Fabrication / sheet metal work test
Replies
0
Views
1K
wontweldcantweld
wontweldcantweld
MJCronin
  • Locked
  • Question
Quality of Welded fabrication from Transylvania - Can you help me ? 4
Replies
6
Views
652
dgeesaman
dgeesaman
mrmalcolm
  • Locked
  • Question
Range of filler material for welding procedures qualification in ISO 15614-1
Replies
3
Views
3K
kingnero
kingnero
rollingcloud
  • Locked
  • Question
What's the main cause for incomplete silver brazing on stainless steels?
Replies
11
Views
3K
TugboatEng
TugboatEng
mrmalcolm
  • Locked
  • Question
Definition of application temperatures in ISO 15614-1
Replies
3
Views
2K
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top Bottom