Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

in rack sprinklers

Status
Not open for further replies.
Shredocaster

Shredocaster

Mechanical
Joined
Aug 25, 2015
Messages
30
Location
CA
Anyone know when NFPA introduced the section on in rack sprinklers and/or mandated such? Thanks!
 
Sort by date Sort by votes
Any specific application??

I have been inspecting since 1986 and they were in nfpa since than.

Use to be versions of 231
 
Upvote 0 Downvote
I remember rack sprinklers from 1974. All calculations by hand which was always a lot of fun!

Used to be NFPA 231C

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question Question
When to include exterior dry sidewall sprinklers in calculations with interior sprinklers?
Replies
1
Views
3K
TravisMack
TravisMack
W
  • Question Question
K25 Sprinklers in Warehouse – Effect on Connected Light Hazard Areas?
Replies
5
Views
10K
cdafd
cdafd
SprinklerDesigner2
  • Question Question
NFPA 13R Density required outside the living units in a common area when using listed residential sprinklers.
Replies
4
Views
16K
cdafd
cdafd
Aikah-Eng
  • Locked
  • Question Question
Celling obstructions to sprinklers discharge
Replies
12
Views
1K
Aikah-Eng
Aikah-Eng
khaled eltaweel
  • Locked
  • Question Question
Sprinklers design area
Replies
4
Views
1K
TravisMack
TravisMack

Part and Inventory Search

Sponsor

Back
Top