Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Importing PV Elite model to CADWorx

Status
Not open for further replies.
PI055

PI055

Mechanical
Mar 10, 2022
14
When we import PV Elite model of vessel into CADWorx we noticed that nozzles on vessel has ANSI flanges although vessel calculation and import data were EN-13445 and EN-1092 for flanges. Can anyone explain why and is there solution for that ?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
John - Your post will hopefully just be deleted.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

FPPE
  • Locked
  • Question
ASME Fixed Tubesheet Design Conditions in PV Elite
Replies
6
Views
3K
FPPE
FPPE
FPPE
  • Locked
  • Question
PV Elite Report - Tubes of the bundle
Replies
5
Views
3K
CuMo
CuMo
M L Kuselan
  • Locked
  • Question
PV Elite design Hub Type Self Reinforced Nozzle (SRN) with LIP
Replies
2
Views
1K
M L Kuselan
M L Kuselan
FPPE
  • Locked
  • Question
Pressure thrust in PV elite
Replies
3
Views
523
FPPE
FPPE
SmallInfo
  • Locked
  • Question
Section for Cross Bracing in PV Elite
Replies
4
Views
449
SmallInfo
SmallInfo

Part and Inventory Search

Sponsor

Back
Top Bottom