Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Import ANSYS material data into Workbench

Status
Not open for further replies.
SverkerO

SverkerO

Mechanical
Joined
Nov 24, 2009
Messages
13
Location
SE
Hi,
Is there away to import material data contained in .mac files into workbench 12?
The data is given with the MP command for example
MPTEMP,1,20
MPTEMP,2,50
MPTEMP,3,100
MPTEMP,4,150
MPDATA,DENS, mat1,1,7.85E-09
MPDATA,DENS, Mat1,2,7.85E-09
MPDATA,DENS, Mat1,3,7.85E-09
MPDATA,DENS, Mat1,4,7.85E-09
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
421
struclearner
struclearner
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top