Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Import ANSYS material data into Workbench

Status
Not open for further replies.
SverkerO

SverkerO

Mechanical
Nov 24, 2009
13
Hi,
Is there away to import material data contained in .mac files into workbench 12?
The data is given with the MP command for example
MPTEMP,1,20
MPTEMP,2,50
MPTEMP,3,100
MPTEMP,4,150
MPDATA,DENS, mat1,1,7.85E-09
MPDATA,DENS, Mat1,2,7.85E-09
MPDATA,DENS, Mat1,3,7.85E-09
MPDATA,DENS, Mat1,4,7.85E-09
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
893
struclearner
struclearner
H
  • Locked
  • Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
somebodyfromworld
  • Locked
  • Question
ACT extensions for Ansys
Replies
0
Views
902
somebodyfromworld
somebodyfromworld

Part and Inventory Search

Sponsor

Back
Top Bottom