Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IMPEDANCE TUBE MODELING ANSYS

Status
Not open for further replies.
saurabhsuresh

saurabhsuresh

Mechanical
Joined
Apr 15, 2010
Messages
17
Location
US
Hi...I am trying to model an impedance tube with a plain glass sample inside using ANSYS which is good for high frequencies. This means that the radius is small. I have a thickness of 4.8mm for the sample. I am having problems when i model this small sample (bigger cross sections work). I get weird distortions and weird dB numbers.Can anyone help me??
Thanks
 
Status
Not open for further replies.

Similar threads

O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
433
struclearner
struclearner
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top