Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

immersion heating/cooling of zinc

Status
Not open for further replies.
joecontrol

joecontrol

Industrial
Joined
Sep 17, 2002
Messages
66
Location
US
I am using a immersion burner to heat and cool a zinc melting furnace. the tube is a ceramic compound. I would like to know if anyone has heard of heating and cooling through the same tube. For example zinc below 850 f burner firing at 100% air and gas. zinc above 860 f burner at 100 % air and min gas to keep flame saftey happy.

Any information would be great

Joe
 
Status
Not open for further replies.

Similar threads

serdart
  • Locked
  • Question Question
Premature drivetrain failures due to Single blade installation of wind turbines
Replies
3
Views
827
3DDave
3DDave
PI055
  • Locked
  • Question Question
Technology of water electrolysis employing Proton Exchange Membrane (PEM) electroliser (PEMEL)
Replies
7
Views
914
PI055
PI055
rdvargasr
  • Locked
  • Question Question
Specification of 65BC03XPX30X bearing of Siemens electric motor to SKF brand
Replies
2
Views
708
IRstuff
IRstuff
Swagnik
  • Locked
  • Question Question
How to distribute the heat of reaction in a multiphase system?
Replies
0
Views
408
Swagnik
Swagnik
Abhi500
  • Locked
  • Question Question
Steam turbine off design performance prediction
Replies
3
Views
475
davefitz
davefitz

Part and Inventory Search

Sponsor

Back
Top