Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

I need help on Piping design methodology

Status
Not open for further replies.

waqas

Mechanical
Joined
Sep 21, 2002
Messages
1
Location
PK
If someone can please direct me to some sites/online books etc, cause I need some information on verifying the piping design for this villa and fast.

here's the deal, the consultants have approved a design that considers a 4" dia Chilled water pipe for a 294 GPM flow at 7.2 Celsius. It is then subjected to mixing with some water from the heat exchanger at 16.4 Celsius.

All I need at the moment, is something for reference, something with some similar case studies, you know what I mean, I hope.

Anyways, I'd appreciate all the help I can get.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top