Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hypermesh failure
- Thread starter tsop
- Start date
GregLocock
Automotive
well, have you defined property1 and is it appropriate for a CQUAD4?
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
HyperWerker
Automotive
Hello,
I guess it's in fact one of the reasons mentioned in the error message:
missing did you move the property into an include file
which is not used any more?
or invalid did you assign the correct card image to the
property? (e.g. NOT a PSHELL to a 1D element)
Or didn't you assign a card image at all?
In the last case, what HM does is to write the id of the prop into the CQUAD card, and saves that property information into some comments. Nevertheless without a card, it's not existing
from the Optistruct point of view.
I guess it's in fact one of the reasons mentioned in the error message:
missing did you move the property into an include file
which is not used any more?
or invalid did you assign the correct card image to the
property? (e.g. NOT a PSHELL to a 1D element)
Or didn't you assign a card image at all?
In the last case, what HM does is to write the id of the prop into the CQUAD card, and saves that property information into some comments. Nevertheless without a card, it's not existing
from the Optistruct point of view.
- Status
Similar threads
- Locked
- Question