Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hyperfoam FEA?

Status
Not open for further replies.
johnsmith2

johnsmith2

Mechanical
Joined
Feb 11, 2006
Messages
114
Location
US
Hyperfoam is a kind of elastomeric material with very highly compressible. How to check this material can withstand incompressible which strain inexcess of 150% during service load. What parameter should I check and what precaution should I take? Thanks.
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
1
Views
7K
rb1957
rb1957
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
EdwardNigma
  • Question Question
What boundary condition techniques do you use to keep FEA models realistic?
Replies
11
Views
29K
GregLocock
GregLocock
EdwardNigma
  • Locked
  • Question Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top