Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hydrogen info 1
- Thread starter buffalow
- Start date
Max flow available = choked flow = pressure ratio of approx 0.55. Get out your compressible flow text...
Thanks!
Pete
P. J. (Pete) Chandler, PE
Principal Engineer
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
Thanks!
Pete
P. J. (Pete) Chandler, PE
Principal Engineer
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
-
1
- #3
buff....
The Compressed Gas Institute issues recommendations and guidelines for various commonly used gasses.
Get your cheap MF boss to purchase the Handbook for you.... it is worth the money asked...... also purchase the "pamphlet" specifically on hydrogen
Try
Hydrogen has it's own unique requirements for storage and piping system design. Another good source of information is the NFPA Standards ( I believe its NFPA 50A or 50B that you should review)
Good Luck
MJC
The Compressed Gas Institute issues recommendations and guidelines for various commonly used gasses.
Get your cheap MF boss to purchase the Handbook for you.... it is worth the money asked...... also purchase the "pamphlet" specifically on hydrogen
Try
Hydrogen has it's own unique requirements for storage and piping system design. Another good source of information is the NFPA Standards ( I believe its NFPA 50A or 50B that you should review)
Good Luck
MJC
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question