I have an unusual requirement where I must permanently label a large number of hydraulic hoses with OD's ranging from 3/8" to approximately 7/8". What I would like is a prenumbered aluminum band which could be crimped on the hose OD or on the fitting. This system would be very similar to the tags used for banding bird legs. Where can I find such products?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hydraulic hose ID tagging system
- Thread starter DanB
- Start date
Similar threads
- Locked
- Question