Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to use LINK68--Thermal electric line in ANSYS

Status
Not open for further replies.
Linda2007

Linda2007

Electrical
Joined
Jan 30, 2007
Messages
2
Location
US
I have a resistor with applied DC current 3A for half an hour

The dimention of the resistor 1cm by 1cm square cylinder and the resistor is put in an enviroment which is 700 cesius

Resisity 0.5
Heat Conductivity 0.08

The properties of the resistor is all isotropic.
I would like to know the heat distribution (temperature distribution) at the end of the half an hour at 3A current
How to input all those constants in LINK68 in GUI?

I am a super beginner of ANSYS. You will be greatly appreciated for your help.
Thank you.
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
826
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top