Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to use copy geomentry in catiav5

  • Thread starter Thread starter balachandar
  • Start date Start date
Status
Not open for further replies.
B

balachandar

Guest
Hi iam basically proengineer.i want to know how to use the copy geometry in catiav5r14?
 
copy geom

in sketcher u can do it by translate/rotate command or by copy/paste(windows utility) & in part mode either by copy paste or by making the body first & then tranformation operation.
 
Besides Copy&Paste as Rachna explained, you can also use Pattern to copy geometric features within a part. Patterns can be rectangular (1 or 2 directions), circular, or User Defined.
 
Status
Not open for further replies.

Similar threads

S
  • Question Question
How to export to .stp files in code?
Replies
3
Views
17K
TudorM
TudorM
Y
  • Locked
  • Question Question
About copy - paste special - copy with link in product
Replies
3
Views
2K
yamaCad
Y
Y
  • Locked
  • Question Question
Copy bodies from selected part bodies in product
Replies
4
Views
3K
yamaCad
Y
A
Industrial drawing how to start
Replies
1
Views
1K
MrCATIA
M
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu

Part and Inventory Search

Sponsor

Back
Top