How to turn the GM TEST off??

[chuken]

Hello all,

I turn the GM TEST on by /MO QERY GT, but I have no idea to turn it off.
Now I can't trim my surface in normal because of the internal error as the following list:

*** Internal error in function ms5fatr/CopyUserFace
*** - gt3faco returned a 40415 when called by
*** ms5fatr/CopyUserFace at position 3635
*** - Aborting ms5fatr/ms3trva at position 3335
*** - Aborting ms5fatr/ValidateData at position 100

Have anyone can give some good idea??


Thanks

 

[IdeasNative]

I dont think you can switch it off. I always thought this was just a command you run on a part and once it's finished in the list window it's finished running the check.
It sounds like there is a problem with the surface.I would try the following:

1. Offset the surface by a value of 0, untick "keep original surface"

Or

2. Extract the surface to a new part

Or last resort....

Export the surface as an iges or step and import to see if errors are removed.

I guess you could always rebuild the surface..