Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Reorder drawing sheets on part navigator, NX7.5

Status
Not open for further replies.

Shadowspawn

Aerospace
Joined
Sep 23, 2004
Messages
259
Location
US
Question of the day... When using the 'smart text' for the current sheet on the drawing <W@$SH_SHEET_NUMBER>, the drawings are 'out of order' sequentially in the part navigator under the drawing tab.... (ie sht1, sht3, sht2, sht4, etc) Is it possible to 're-order' sht 2 to appear before sht 3? TIA...

Regards,
SS

CAD should pay for itself, shouldn't it?
 
Please disregard.... the software is apparently smarter than I am, as it re-orderd itself. Thanks anyways guys!

Regards,
SS

CAD should pay for itself, shouldn't it?
 
Er is no fixed order in Sheets. If you click on the titlbar of the column in your Part navigator you can re-order them alphabetically...

Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top