Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to modle a bonded piezo plate?

Status
Not open for further replies.
hechengli

hechengli

Mechanical
Joined
Apr 16, 2002
Messages
17
Location
US
Could somebody please give me some idea how to model a bonded piezo plate, I use shell63 for plate and solid5 for piezo. the piezo is bonded on the surface of plate, I tried CP, NMMRG, CPINTF, etc, none of them seems work, did someone did this before? Thanks
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
425
Vishakh_Rajendran
Vishakh_Rajendran
D
  • Locked
How to take pickup support
Replies
0
Views
3K
deepak1313
D
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH

Part and Inventory Search

Sponsor

Back
Top