Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to make stepped beam in ANSYS 13

Status
Not open for further replies.
georg2976

georg2976

Mechanical
Joined
Oct 18, 2011
Messages
15
Location
PT

I have one problem with Ansys. How to make beam with two different cross section areas? I need step by step instructions.

Regards
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
849
MihailW
M
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
3K
struclearner
struclearner
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O

Part and Inventory Search

Sponsor

Back
Top