Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to make batch conversions from CADKEY (*.prt) files to *.dxf? 1

Status
Not open for further replies.
felix

felix

Mechanical
Joined
Oct 20, 2000
Messages
3
Location
ES
I have to make the conversion of over 3000 files in *.prt format from CADKEY 7 to *.dxf format (or another CAD format as *.dwg, etc ...).
Does it exist any program to make the batch conversion for those files?

Thanks.
 
Status
Not open for further replies.

Similar threads

D
  • Locked
  • Question Question
identifying and using AP242 STEP files
Replies
2
Views
3K
dtimberlake
D
bonbon83
  • Locked
  • Question Question
how to make opening in tubular member in IdeaStatica
Replies
1
Views
352
Basit Shafi
Basit Shafi
LeRepeteur
  • Locked
  • Question Question
Autodesk Fusion 360 - How to use Remote Load's in simulation to be defined by an area
Replies
0
Views
446
LeRepeteur
LeRepeteur
YungPlantEng
  • Locked
  • Question Question
How to increase utilization of maximo?
Replies
0
Views
246
YungPlantEng
YungPlantEng
vinodnx7
  • Locked
  • Question Question
Want to stop Switching option in Spacemouse enterprise
Replies
0
Views
254
vinodnx7
vinodnx7

Part and Inventory Search

Sponsor

Back
Top