Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to introduce spring element in double wedge 2-D airfoil

Status
Not open for further replies.
bobnastpat

bobnastpat

New member
Jan 10, 2012
2

Hello,

I am working on flutter analysis of the double wedge airfoil. The airfoil is attache with 2 springs, one translational spring and other rotational spring they represents bending and torsional stiffness respectively.

Both the springs are connected at the aeroelastic axis which is one node in the airfoil.

Please tell me how to make these two springs in MSC/Patran. I'm not understanding what to give in DOF at node 1 & 2. as i have only one node.
 
Status
Not open for further replies.

Similar threads

nmruble
  • Locked
  • Question
Bush Element /Spring Element, what is the difference? 1
Replies
1
Views
862
dmapguru
dmapguru
Gabriel93
  • Locked
  • Question
Error 4521 (elements perpendicular to their coordinate system x-axis)
Replies
0
Views
729
Gabriel93
Gabriel93
Giang123
  • Locked
  • Question
ASET1 card in NASTRAN
Replies
2
Views
1K
Giang123
Giang123
MihaelaN
  • Locked
  • Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
1K
MihaelaN
MihaelaN
MihaelaN
  • Locked
  • Question
2D Axisymmetric contact problem
Replies
0
Views
999
MihaelaN
MihaelaN

Part and Inventory Search

Sponsor

Back
Top Bottom