Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to improve display resolution in drawing
- Thread starter robonave
- Start date
melancthon
Aerospace
Robonave,
Did you ever figure this one out on your own? 'Cause I'm ahving the same problem.....
Mel
Did you ever figure this one out on your own? 'Cause I'm ahving the same problem.....
Mel
- Thread starter
- #3
Yes I do!
When you switch to drawing you can modify the arcs and circles smoothness through the assist-options menu clicking over the display tag just like you do for the model environment. If you have already defined some views it suffice to press the update view button at the base of the browser window.
robonave
When you switch to drawing you can modify the arcs and circles smoothness through the assist-options menu clicking over the display tag just like you do for the model environment. If you have already defined some views it suffice to press the update view button at the base of the browser window.
robonave
- Status
Similar threads