Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to have displacement and velocity control with together in one explicit step?

Status
Not open for further replies.
sabuy

sabuy

Mechanical
Joined
Jul 11, 2016
Messages
10
Location
IR
hi
i have a model that the edges must be open maximum=0.05 meter and the velocity must be 0.0033 meter/second.To have a 0.05 meter displacement with the 0.0033 meter speed, the time must be changed?
how can i have this with together in one explicit step?
i mean that should i increase time step?
the velocity defined is boundary condition.
thanks
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Invalid Restart Step Error (Static to Explicit)
Replies
3
Views
2K
an_02
A
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
4K
SWComposites
SWComposites
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S
S
  • Locked
  • Question Question
How to Properly Implement Viscosity in SPH Using ABAQUS Explicit Analysis?
Replies
1
Views
2K
FEA way
FEA way
swahlgren
  • Locked
  • Question Question
Bug in explicit.
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top