Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to get a 2D deformed section from 3D result?

Status
Not open for further replies.
flautist

flautist

Materials
Joined
Sep 1, 2003
Messages
1
Location
CN
using msc.marc for multistep deformation.
I have finished the first step analysis using 3D model. The next step is to get a 2D section figure from deformed 3D model for further analysis. Only a 2D figure is enough to import Marc for the second step analysis.
How can I get the figure?
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
EdwardNigma
  • Locked
  • Question Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
4K
rb1957
rb1957
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
D
  • Locked
How to take pickup support
Replies
0
Views
3K
deepak1313
D

Part and Inventory Search

Sponsor

Back
Top