Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to define the expansion coefficient variation in 2D direction.

Status
Not open for further replies.
woodunb

woodunb

Agricultural
Joined
May 2, 2009
Messages
3
Location
CA
Hi Folks,
I have a question about how to input the expansion coefficient into the ABAQUS model.It is orthotropic material, located in the cylindrical coordinate system. it has different expansion coefficient in Radial and Longitudinal direction. How to input this data in to ABAQUS model? Thanks a lot.

 
Status
Not open for further replies.

Similar threads

vikram manoj
  • Question Question
How to reduce fiber damage
Replies
2
Views
8K
Compositepro
Compositepro
S
  • Question Question
Define zaxis of coordinate system with python
Replies
2
Views
7K
solero5
S
M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S
SJ8
  • Locked
  • Question Question
Define non symmetric material behaviour
Replies
2
Views
2K
ShiningEngineer
ShiningEngineer

Part and Inventory Search

Sponsor

Back
Top